Self-Adhesive Bitumen Membrane

Home \ Waterproofing Membrane \ Self-Adhesive Bitumen Membrane

Self-Adhesive Bitumen Membrane

 

Aquathene APF-3000 SELF-ADHESIVE MODIFIED BITUMEN WATERPROOF MEMBRANE WITH CROSS-LAMINATED PE FILM

 

Product Description

Aquathene APF-3000 pressure sensitive adhesive high polymer membrane, a patent product researched and developed by Keshun, is a high-performance membrane compounded by special technique. The structure of strong overlapped double-layer film plus vertical and horizontal mesh make the performance of tensile strength, dimensional stability, heat stability and UV resistance largely improved. The adoption of patent wet-applied construction technique make the PSA of the membrane crosslink chemically with the cement slurry, which form a powerful waterproof “skin” on the substrate. The “skin” will never separate from the substrate which make sure of the durability of the waterproof course and non water channeling.

Product Features

Strong combination promote six performance

  1. Double waterproof protection
  2. Size stability and excellent tear resistance
  3. Flexible texture and root resistance
  4. Anti-ultraviolet for 6 months
  5. High elongation and stretch ability
  6. Great thermo stability

Four active waterproof advantages

  1. Grow with structural concrete actively
  2. Good nail shank watertight performance to actively healing aperture 2mm damage
  3. Actively offset structural deformation
  4. Actively stop the leak point

 

Product Structure

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

Single side adhesive

  1. Valeron cross-laminated film
  2. Pressure sensitive reaction self-adhesive layer
  3. Isolation film

Double side adhesive

  1. Isolation film
  2. Pressure sensitive reaction self-adhesive layer
  3. Valeron cross-laminated film
  4. Pressure sensitive reaction self-adhesive layer
  5. Isolation film

Where to use

  1. Underground construction, garage, planted roof, roof garden
  2. Metro, tunnel, pool, roof
  3. Corrosive and deformed structure
  4. Warehouse, workshop, etc..

 

Specification

Product name Product class Single/double side self-adhesive Membrane thickness
Aquathene APF-3000 self-adhesive Modified bitumen waterproof membrane with cross-laminated PE film Type I, Type II Single side / Double Side 1.2mm,1.5mm,2.0mm / 1.5mm,2.0mm

 

 

Database (implemented standard: GB/T23457-2009,Wet-applied/P)

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

 

Database Implemented standard: GB 23441-2009,n,pe

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

Property Typical Value Test Method
Colour Dark Grey NA
Nominal Thickness 1.5mm NA
Tensile strength of membrane 4N/mm ASTM D412 modified
Elongation of membrane(to ultimate failure of rubberised asphalt) 220% ASTM D412 modified
Lap adhesion@23 ℃ 2540 N/m ASTM D1876
Cycling over crack@-32℃ No effect 100 cycles ASTM C836
Puncture resistance of membrane 200N NASTM E154
Resistance to hydrostatic head 60m ASTM D5385
Tear resistance 23 N/mm ASTM D624
Permeance 0.36ng/(m .s.pa) ASTM E96(12)
Peeling strength to concrete 2730N/M ASTM D903-98

Aquathene APF-405 SELF-ADHESIVE MODIFIED BITUMEN WATERPROOF MEMBRANE

 

Product Description

Aquathene APF-405 Self-adhesive modified bitumen waterproof membrane utilized aluminized Mylar film as surface reinforcing material, covered with asphalt adhesive material which contains active agent rubber . APF-405 can be used directly with polymer cement mortar in the construction (wet applied method), but also can be used according to the traditional construction method (dry applied ), so as to meet the different needs of projects. This product is especially suitable for the continuous construction of waterproof engineering design, when the construction period is long , and the exposure time of the membrane also is long, the component of APF-405 can function to reduce fold and the drum phenomenon of the materials.

Product Features

Strong stick relay good tensile strength excellent waterproof performance high reflectivity of sunshine, can prolong the service life of coiled material, and can reduce the indoor temperature of the building.

 

Product Structure

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

Where to use

  1. Roofing, underground waterproof engineering;
  2. Concealed waterproof project with protective covering.

 

Specification

Product name Class Membrane thickness
Aquathene APF-405 self-adhesive Modified bitumen waterproof Membrane Type I, Type II 1.2mm,1.5mm,2.0mm

Database

(implemented standard: GB/T23457-2009,Wet-applied/P)

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

 

Database 

Implemented standard: GB 23441-2009

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

Aquathene APF-500 SELF-ADHESIVE MODIFIED BITUMEN WATERPROOF MEMBRANE WITH POLYESTER RE-ENFORCEMENT

 

Product Description

Aquathene APF-500 Self-adhesive modified bitumen waterproof membrane with polyester re-enforcement polyester tire is a reinforcing layer, and then using polyethylene film as the surface material, and the underside use silicone oil anti sticking isolation paper / film, so this materials has the function of cold self-adhesive, low temperature construction operations, which makes it a environmental friendly material.

Product Features

  1. Remarkable waterproof performance;
  2. Excellent heat resistance and low temperature flexibility;
  3. Outstanding puncture resistance .
  4. Strong UV resistance, long life span,
  5. Strong adhesion which can targeted the leakage in localiaed area;
  6. Good stability and corrosion resistance, lasting effect.

 

Product Structure

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

Where to use

Basement, metro tunnel, pool, various area of waterproof project for civil building; Good for non exposed roofs; The aluminum foil membrane is used for exposed roofs.

 

Specification

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

Database

Implemented standard: GB23441-2009

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

Aquathene APF-600 WET/PRE-APPLIED MODIFIED BITUMEN WATERPROOF MEMBRANE WITH POLYESTER RE-ENFORCEMENT

 

Product Description

Aquathene APF-600 wet-applied Modified bitumen waterproof membrane With polyester re-enforcement is petroleum bitumen, use special modifier to modify the self-adhesive bitument, and use polyester fabric as the strengthening layer. The upper surface is the silicon coated isolation film, and the back surface is the silicon coated isolation film or PE film, it is a polyester modified bitumen waterproof membrane which can be wet-applied construction.

Aquathene APF-600 pre-applied is petroleum bitumen, use SBS / SBR, tackifying resin as modifier to modify the self-adhesive bitument, and use polyester fabric as the strengthening layer. The upper surface is the silicon coated isolation film, and the back surface is the silicon coated isolation film or PE film, it is a polyester modified bitumen waterproof membrane which can be pre-applied construction.

Product Features

Wet – applied: can be adhesive with cement in the process of solidification , and give born to interconnected mesh in the interfacial region , so as to form a strong adhesion.

Pre -applied : Due to the formulation of the product contains special active substances, which can be interconnected with the flowing concrete to form a strong adhesion, so as to achieve the full paste between the waterproof membrane and the building structure.

Where to use

Wet–applied: Widely used in various types of the non-exposed roof, underground and indoor waterproofing projects, and excavation subway, tunnels, pools, canals and other waterproofing projects, especially for waterproofing projects which requires cold construction.

Pre -applied: Used for underground construction and underground excavation subway or other underground projects’ floor and side wall.

 

Product Structure

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

Specification

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

 

Database

Implemented standard: GB/T 23457-2009

 

Self-Adhesive Bitumen Membrane Self-Adhesive Bitumen Membrane

Request Consultation

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    Contact us!