Plugging Materials

Home \ Waterproof Coating \ Plugging Materials

Plugging Materials

 

Aquafill ZT-106 PLUGGING QUICK-CURED CEMENT

 

Product Description

Aquafill ZT-106 Plugging quick-cured cement is the absorption of foreign advanced technology and retains the advantages of similar products at home and abroad, developed efficient inorganic waterproof plugging material.

Product Features

  1. One component gray powder;
  2. Non-toxic, harmless, non-polluting;
  3. Instant sealing, can be used on upstream face and downstream face;
  4. The strength development speed and compressive strength is the leading domestic level;

 

Where to use

Quick-cured type is used for all kinds of underground buildings or structures, cable channel, pool, kitchen and toilet, air defense caves, subways, tunnels and other rapid plugging works.

 

Plugging Materials Plugging Materials

 

Packing Specification

2kgs/bag

 

Database

Implemented standard:GB23440-2009

Plugging Materials Plugging Materials

Aquafill ZT-106F PLUGGING QUICK-CURED CEMENT

 

Product Description

Aquafill ZT-106F “Plugging King” is a one component plugging reinforced material with high performance, which is made of special cement composed of many imported additives and reinforced aggregates.

Product Features

  1. Environmental protection, non-toxic, harmless and pollution-free;
  2. Completely curing after 4-8 minutes;
  3. Excellent plugging performance, can be applied both on upstream face and downstream face;
  4. High bonding strength and excellent impermeability;
  5. Fast plugging, ZT-106 Fcould not be applied with water but ZT-106F can be.

 

Where to use

It is used for all kinds of underground buildings or structures,cable channel, pool, kitchen and toilet,air defense caves,subways, tunnels and other rapid plugging works.

 

Packing Specification

2kg/bag

 

Database

Implemented standard:GB 23440-2009

Plugging Materials Plugging Materials

Aquafill ZT-107  MODIFIED EPOXY INJECTION GROUT

 

Product Description

This product is mainly made up by epoxy resin, curing agent and other catalyst, it is a grouting material which has high strength and adhesive strength.

Product Features

  1. High Performance
    High strength and adhesive strength
  2. Good grouting ability
    Low viscosity and good grouting ability
  3. Convenient and efficient
    It can be adjusted the proportion according the construction temperature.
  4. Multifunctional
    Reinforce, strengthening, leaking stoppage, waterproofing and corrosion prevention.

 

Where to use

Reinforce, strengthening and leaking stoppage for:

  1. Tunnel, metro and other underground structure
  2. The crack of girder, pillar and pile
  3. Dam, port, wharf, swimming pool and water tower.
  4. Seal for the water pipe and chemical pipeline.

 

Packing Specification

5kg/Bucket; 10kg/Bucket; 20kg/Bucket

 

Database

IMPLEMENTED STANDARD: Q/SDKS 015-2014

Plugging Materials Plugging Materials

Aquafill ZT-108  POLYURETHANE INJECTION GROUT

 

Product Description

This product is a compound polymer which mainly made up by toluene diisocyanate and trihydroxy-soluble polyether. It can be reacted with water, the volume expands quickly so that seals and blocks the leakage passage rapidly.

Product Features

  1. Fast Speed
    After reacting with water, it solidifies as elastic colloidal solid in seconds.
  2. Well waterproof effect
    Good anti-permeability, high strength, large expansion rate and well supporting stability
  3. Convenient and efficient
    Low viscosity, good grout ability and simple equipment
  4. Secondary waterproofing
    It reacts with water, and releases carbon dioxide then foams and swells. Meanwhile, it has secondary waterproofing.

 

Where to use

  1. Leaking stoppage of tunnel, colliery, well drain, dyke, wharf, and other underground structure
  2. Leaking stoppage and seal of construction joint, settlement joint, deformation joint, lap joint, and other distress in concrete.

 

Packing Specification

5kg/Bucket; 10kg/Bucket; 20kg/Bucket;

 

Database

IMPLEMENTED STANDARD: JC/T 2041-2010

Plugging Materials Plugging Materials

 

Where to use

Reinforce, strengthening and leaking stoppage for:

  1. Tunnel, metro and other underground structure
  2. The crack of girder, pillar and pile
  3. Dam, port, wharf, swimming pool and water tower.
  4. Seal for the water pipe and chemical pipeline.

 

Packing Specification

5kg/Bucket; 10kg/Bucket; 20kg/Bucket

 

Database

IMPLEMENTED STANDARD: Q/SDKS 015-2014

Plugging Materials Plugging Materials

Request Consultation

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    Contact us!