Modified Bitumen Coating

Modified Bitumen Coating

RubberBit KS-520 NON-CURING RUBBERIZED BITUMEN WATERPROOF COATING

Product Description

RubberBit KS-520 Non-curing rubberized bitumen waterproof coating with high solid content. With function of non-curing after long time exposure to air, always keep the viscous rubber characteristics; strong self-healing capacity, once touched immediately bonded, difficult to peel off, at the below 25℃ still stay good bonding properties; It can solve the waterproof layer cracking fatigue breaking, and the aging problem in high stress etc. , various of problems due to primary cracking stress transfer to the waterproof layer, at the same time, KS-520 can be well closed primary pores and cracks, then to settle the problem of water leakage for the waterproof layer; It also can solve the poor compatibility between waterproof membrane and waterproof coating.

It can be used as a new type of waterproof material, which is different from the existing waterproof materials.

Product Features

1. Excellent creep properties:

Can effectively absorb the stress from the roots level, when the outside stress functions, immediately lead to deformation then protect the waterproof layer from damage, improve the reliability and prolong the service life of the waterproof layer;

2. Excellent performance of the construction:

Form film immediately, no need maintenance, so that workers can immediately carry out the next construction step; With good affinity, easy to combine with any other materials, Then form a stable waterproof coating, requirements on the base flatness is low, Do not need substrate treating agent for coating;

3. Excellent bonding performance:

Immediately bonded once touched, difficult to peel off , can fill the base deformation cracks;

4. Temperature adaptability:

excellent resistance to high temperature of 60~70℃, at -25still have good flexibility;

5. Excellent self-healing:

When the waterproof layer is subjected to external damage, damage will not expand, at the bottom of the waterproof layer does not occur water leakage, and due to the Creep of coatings can gradually repair the damage, greatly improving the reliability of waterproof layer.

6. Excellent environmental protection performance:

no organic solvents, solid content more than 99%, non-toxic, tasteless, no pollution, no smell or smoke in the construction process, is a kind of environmentally friendly waterproof coating;

7. Excellent extension:

over 1000%of the elongation rate, 60mm extension, no damage to the waterproof layer because of the displacement of the base, so that the building structure is always maintained in good condition;

8. Excellent corrosion resistance and aging resistance:

After the immersion test in acid and alkali, salt medium, and heat aging treatment the function of the materials is maintained at more than 90%.

Where to use

1. Widely used in industrial and civil building roof and underground waterproof engineering;
2. Grouting leakage stoppage project of deformation joint;
3. KS-520 compound with membrane on the construction site, can forms a reliable compound waterproof system.

Packing Specification

18 kg/ bucket

Recommend Usage

The usage for 1.0mm thickness coating is about 1.1-1.25 kg/square meter.

Database

Implemented Standard: Q/SDKS059-2016

Rubberbit KS-560 SPRAY-APPLIED QUICK-CURED RUBBERIZED BITUMEN WATERPROOF COATING

Product Description

Rubberbit KS-560 spray-applied quick-cured rubberized bitumen waterproof coating is environment friendly and multifunction. It is made up a combination of high-performance modified emulsified rubber bitumen and curing agent, using advanced technology of cooling spray to make films.

Product Features

1. Simple and convenient construction .using advanced technology of cooling spray, saving time and labor.
2. .Quickly set all set within 3-5 seconds after spraying.
3. Jointless waterproof membrane. It is suitable for every abnormal and complicated structured surface.
4. Strong adhesion with basic level .
5. Environmentally friendly and nontoxic. Without any organic solvent and stimulation.
6. Excellent performance. Temperature resistance, aging resistance, impact resistance, tensile resistance and hydrostatic pressure resistance. Anti acid, alkali and salt. Excellent extension.
7. Good extension. Great film extensibility, over 1000% of the elongation rate, ability to adapt to structural of 90%, can stretch, good fatigue resistance of waterproof layer.
8. Good nail shank impermeability. The rubber in coating has a very good elasticity that can automatically form a protective effect on the pinhole.

Spray Sketch

Where to use

1. Industrial and civil building basement, roofing and other protective waterproof.
2. Chemical, electric power and other industrial protection.
3. Diversion project, drainage engineering and water conservancy facilities protection.
4. Underground space liner and so on.
5. Volatile matter barrier and defense engineering.

Packing Specification

50kg/bucket, 200kg/bucket

Recommend Usage

The usage for 1.0mm thickness coating is about 1.8-2.0 kg/square meter.

Database

Implemented Standard: Q/SDLS 052-2016

Rubberbit KS-570 WATER-BASED, NON-CURING, RUBBERIZED BITUMEN WATERPROOFING COATING

Product Description

KS-570 is an improved material developed by CKS keshun, aiming at solving the heating issue of hot-melt non-curable rubberized bitumen waterproof coating. It is a material which can be sprayed directly with non-toxic, tasteless, construction safety and environmental friendly performance. It has completely improved the heating problem, while maintaining its original performance. The product consists of A, B two components, can be applied with SBS membrane, self-adhesive membrane. It is widely used in bridges, tunnels, military, agricultural facilities, housing construction.

Product Features

1. Easy construction: no heating, sprayed directly under normal temperature, high construction efficiency, to greatly shorten the construction period and save labor costs;
2. Strong adhesion: can be directly applied on wet substrate, bonded tightly with the substrate, peel strength significantly improved, no channeling water, and good adhesion with all kinds of building materials;
3. Non-curing: Forming a creep deformation material after water vapor, non-curing even after long-term contact with the air, insoluble in water;
4. Self-repairing: Good self-repairing ability to puncture and tear damage of waterproof layer, to improve the reliability and service life;
5. Good extensibility: with 50mm or higher extensibility, will not damage the waterproof layer due to the displacement of substrate, so that the building structure will be in sealed state permanently.
6. Safe and environmental friendly: water-based products which does not contain any organic solvents, non-toxic, tasteless, pollution-free, to meet the national safety and environmental requirement

Where to use

1. Ideal for new building roof and underground waterproofing project;
2. Also ideal for old roof maintenance, no need to eliminate the original waterproof layer;
3. Can be used alone, also can be applied with waterproofing membrane, forming a reliable composite waterproof system;
4. Can be used as a primary agent for sprayed curing bitumen coating to enhance the bonding effect with substrate;
5. Can be made into a non-curing membrane on site by applying the ” three coating two fabrics” methods.

Part A:

500kg/barrel

200kg/barrel

Part B:

5kg/barrel

Database

Q/SDKS068-2016

Rubberbit KS-580 HIGH POLYMER MODIFIED BITUMEN WATERPROOF COATING

Product Description

RubberBit KS-580. High polymer modified bitumen waterproof coating is mainly use bitumen as raw materials, with water as the dispersion medium, with other polymer such as SBS or APP to modified the bitumen, finally launch out this polymer modified bitumen waterproof coating. As soon as the normal temperature cured the coating, the materials can be formed on the surface a layer of elastic waterproof film, it can be work along to function as waterproof coat, and also can be compound with waterproof membrane to form a compound waterproof system.

Product Features

1. The material is a aquatic product, with non-toxic, no smell, non combustible characteristics, safe and reliable;
2. The material is a single component, cold method construction, simple operation;
3. Acid and alkali resistance, aging resistance, long service life;
4. The film has good flexibility, crack resistance and heat durability, good adhesion, is a kind of ideal waterproof material;
5. Good compatibility with other waterproof membrane, melting after re-heating in the film state, the materials can be perfectly joint with the hot melt method constructed modified bitumen, to form a composite high grade waterproof structure.

Where to use

1. Non exposed waterproofing of roof and underground structures.
2. Compound with all kinds of modified bitumen waterproofing membrane to composite strong waterproof layer.
3. As basic treatment agent for all kinds of modified bitumen waterproof membrane.
4. Can be directly coated in a variety of pipe, concrete surface to function as protection, anti-corrosion effect.

Packing Specification

20 kg/bucket

Recommend Usage

The usage for 1.0mm thickness coating is about 2.0kg/square meter.

Database

Implemented Standard: JC/T 408-2005

Rubberbit KS-590 SOLVENT-BASED RUBBERIZED BITUMEN WATERPROOF COATING

Product Description

RubberBit KS-590 solvent-based rubberized bitumen Waterproof coating used high quality bitumen as raw material,and polymer rubber as modifier, dissolved by solvent, so as to make it to be a delicate, black, viscous liquid waterproof coating.

Product Features

1. No flowing in high temperature, no cracking in low temperature, and good adaptability;
2. The product has good adhesive property, crack resistance, excellent flexibility;
3. Good acid and alkali resistance, durable for chemical corrosion, anti mildew, adapt to various weather condition;
4. Fast curing speed, can be applied at room temperature and low temperature, easy to operate;
5. The products do not contain benzene and other toxic solvents.

Where to use

1. Applicable to the general construction of the roof, toilet, bathroom, kitchen and others.
2. Apply to roof, basement, wall and other moisture;
3. Can be used for all kinds of pipe, concrete surface against corrosion.

Packing Specification

18 kg/ bucket

Recommend Usage

The usage for 1.0mm thickness coating is about 1.6 kg/ square meter.

Database

Implemented Standard: JC/T852-1999