New Generation Coating and Insulation Materials

Home \ Epoxy \ New Generation Coating and Insulation Materials
4 February 2020 - 14:48, by , in Epoxy, Comments off

INSULATION AND COATING

  • POLYUREA
  • LIQUID MEMBRANE
  • INJECTION
  • EPOXY
  • PAINT
  • JOINT-DILATATION FILLER
  • SURFACE REPAIR PRODUCTS
  • PRIMER
  • PU ADHESIVES AND BINDERS
  • RIGID POLYURETHANE FOAM

 

CONSTRUCTION CHEMICALS

  • SEALANTS
  • ADHESIVE AND GLUES
  • PU FOAMS
  • AEROSOLS

 

MACHINERY

  • HAND TOOLS
  • LIGHTING EQUIPMENT
  • GARDEN TOOLS
  • HARDWARE

 

FOREIGN TRADE

  • ABROAD MARKETING AND WAREHOUSE MANAGEMENT

 

CONSTRUCTION

  • BUILDING
  • REAL ESTATE

 


 

WATERPROOFING AND COATING SYSTEMS

POLYUREA

Unique Waterproofing and Surface Coating Technology

 

WHAT’S THE POLYUREA?

Polyurea, is the products which applied by special high pressure spray machine and waterproofing and coating materials.

  • Two component , aromatic, UV resistant
  • %100 solid content
  • VOC free, odorless
  • Fast curing and service time
  • Seamless
  • Applicable in any desired thickness
  • Applicable in any surface with suitable primer
  • Can be used on horizontal and vertical surface
  • Resistant to all types of vehicle traffic
  • Resistant to perforation by plant roots
  • Water vapor permeability
  • Excellent flexibility and crack bridging
  • Excellent chemical and abrasion resistance
  • Excellent resistance to weather conditions

 

POLYUREA APPLICATION AREAS

  • Water tanks and water pipes
  • Pools, swimming pools and ponds
  • Roofs, Baloconies and Teracess
  • Truck bed liners
  • Parking lots, garages, hospitals and factories
  • Industrial Floors
  • Sewage and Wastewater Treatment Plants
  • Decorative applications
  • water parks
  • Refineries, Petrochemical and energy industry
  • On thermal insulation applications
  • Foundation and curtain concretes
  • Ship coating and Marine Facilities
  • Tunnels and airports
  • Roads and bridges

 

 

POLYUREA APPLICATION MACHINES

HIGH PRESSURE SPRAY MACHINES

  • Two component
  • 1:1 mixing ratio by volume
  • 140-180 bar pressure
  • About 70°C-80 °C product heat
  • 125 m length of hose

 

POLYUREA APPLICATION EQUIPMENT

EQUIPMENT LIST

  • Spray Machine
  • Spray Gun
  • Heated Hose
  • Compressor
  • Refrigerated Air Dryer
  • Generator (Optional)
  • Drum Heater (Optional)
  • Drum Mixer
  • Equipment Cleaner Solvent

 

POLYUREA APPLICATION LAYERS

4. Aliphatic Top Coat Using for protection of color on top coat applications

3. Polyurea Apply with suitable polyurea.

2. Surface Preparation and Primer Repairs and priming should be done according to the surface type.

1. Substrate Metal, concrete, wood, etc.

 

 

1. LAYER (SUBSTRATE)

Excellent adhesion to surfaces such as polyurethane foam, concrete, wood, metal and aluminium.

  • concrete
  • wood
  • metal
  • aluminium
  • Spray Polyurethane

 

2. LAYER (SURFACE PREPARATION AND PRIMER)

Surface preparation of concrete

  • The surface must be clean and dry.
  • If necessary, the surface should be wiped off with suitable wiping machines
  • Cracks and joints should be filled with suitable repair materials.
  • Suitable primer is used according to the moisture content on the surface.
  • According to increase the adhesion after priming to be used silica sand

 

Surface preparation of metal

  • The surface must be clean and dry.
  • Surface corrosion should be cleaned by sandblasting and polishing method.
  • Priming with suitable primer
  • According to increase the adhesion after priming to be used silica sand.

 

3. LAYER (POLYUREA)

  • Polyurea components are prepared by mixing before application
  • Spray machine is adjusted according to the required temperature and pressure values.
  • Polyurea to be applied on the surface according to the application procedure until the desired thickness is obtained.

 

4. LAYER (ALIPHATIC TOP COAT)

After applying the polyurea, any desired color of the aliphatic paint of the desired color should be applied to prevent the color change of the polyurea.

 

3 IMPORTANT POINTS FOR POLYUREA APPLICATION

  • APPLICATION
  • SURFACE PREPARATION
  • SUITABLE PRODUCT

 


 

LIQUID MEMBRANE

WHAT’S THE LIQUID MEMBRANE?

  • Cheaper alternative to polyurea
  • One component, UV resistant
  • Contain solvent
  • Seamless
  • Easy to apply (brush, roller, airless gun)
  • To be able to install a crack bridge (at least 2 mm)
  • High elasticity
  • Easy to repair
  • Suitable for light foot traffic
  • Root resistance
  • Resistant to weather conditions (temperature, water and freezing)

 

GENERAL APPLICATION AREAS

  • Roof, balconies and terraces
  • Foundation and curtain concrete, green roof,
  • Protection and waterproofing on thermal insulation applications (PU foam, EPS, XPS etc.)
  • Wet areas such as bathrooms and WC

 

LIQUID MEMBRANE APPLICATION LAYERS

4. Aliphatic Top Coat Using for protection of color on top coat applications

3. Liquid Membrane Apply with suitable liquid membrane.

2. Surface Preparation and Primer Repairs and priming should be done according to the surface type.

1. Substrate Metal, concrete, wood, etc.

 


 

THERMAL INSULATION SYSTEMS

PU SPRAY FOAM

WHAT IS SPRAY PU FOAM?

PU Spray Foam is the product which applied by special high pressure spray machine for thermal insulation.

  • Two component
  • Closed cell structure
  • B2 (E) fire reaction
  • Easy and high application speed (~ 1000 m² per day)
  • Seamless, no heat bridge
  • Self-adhesive properties on many surfaces (concrete, wood, metal etc.)
  • Does not grow insect and fungus
  • Excellent thermal insulation for a long time (70-80 years)
  • High energy saving
  • Water vapor permeability
  • Excellent mechanical properties
  • Low storage and transportation cost
  • Partial sound insulation

 

 

SPRAY PU FOAM APPLICATION MACHINES

HIGH PRESSURE SPRAY MACHINES

  • Two component
  • 1:1 mixing ratio by volume
  • 80-110 bar pressure
  • About 35°C – 45°C product heat
  • 125 m length of hose

 

SPRAY PU FOAM APPLICATION EQUIPMENT

EQUIPMENT LIST

  • Spray Machine
  • Spray Gun
  • Heated Hose
  • Compressor
  • Refrigerated Air Dryer
  • Generator (Optional)
  • Drum Heater (Optional)
  • Equipment Cleaner Solvent

 

GENERAL APPLICATION AREAS

  • Foundation and curtain concrete
  • Floor, Wall
  • Ceiling, Attick
  • Ships and storage tanks
  • Cold storage room
  • Chicken farms and barns
  • Other thermal insulation areas

 

Source – Whitechem

About author:

Comments are closed here.

Get Free Quote

    Our Blog Posts by Month

    Request Consultation

    We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

      X
      Contact us!