How Long Will Waterproofing Last?

Home \ Waterproofing \ How Long Will Waterproofing Last?
12 May 2022 - 1:37, by , in Waterproofing, No comments

The best waterproofing systems will last for at least ten years. However, this depends on the waterproofing materials employed and the quality of craft of the waterproofing contractor.

 

Research has shown that poor waterproofing is among the most prevalent construction defects. They are often used as the basis for insurance claims for building damage. This is why it’s vital to be aware of the effectiveness of your system for waterproofing.

 

This article will discuss the various types of equipment and the quality you must look for to ensure that you can enjoy it for ten years or more.

 

What exactly are Waterproofing Systems?

 

Before we discuss the different aspects that determine the efficacy of the waterproofing system for your building, first, we need to understand what exactly waterproofing is.

 

Technically Speaking, a waterproof product does not let moisture traverse it. This is different in comparison to “water-resistant”, which only limits water movement.

 

It is put on damp areas or surfaces exposed to your home’s weather to make sure that no moisture enters or escapes. This is typically the case with the bathroom as well as your roof.

 

Why is Waterproofing Essential in All Buildings?

Waterproofing Waterproofing

As we have mentioned previously, water has been cited as a significant cause of damage to buildings. How exactly does this occur? When water remains undiscovered for long durations and then becomes dangerous by the following methods:

 

The growth of molds begins to appear due to the humid and dark conditions caused by the accumulation of moisture in the wall of your house. Both mildew and mould release spores into the air that can affect the health of people living who live in the area.

 

Rotting structural timers are caused by decay and mould. When major structural elements like beams and bearers are compromised, the structure’s structural integrity could be in danger.

The corrosion of plumbing occurs when certain metals oxidize in water, leading to the decay of pipes. This can lead to more water leaks.

Fires can start if water enters the electricity-powered appliances, sockets, or wiring.

Water is also a mobile material that can reach every kind of space behind walls. It is also known as rising damp. Water can move through its different states through floors, walls and masonry by capillary action. Therefore, even vertical gaps upward don’t stop water movement.

 

The quality of the workman’s performance affects the durability of your waterproofing system.

Based on the region depending on the location, different waterproofing methods will be required. For instance, the bathroom shower is subject to an incredibly high moisture level, while the roof is necessary to stand up to heavy rain. The way water is absorbed it challenging to determine the quality of work.

 

But, the waterproofing of the various areas follows some basic rules that must be followed.

 

Joints and Protrusions are the Weakest Points

 

First, the weakest spot in all of these areas is protrusions, which are the places where vertical and horizontal surfaces meet. These are the places where individual, material characters are broken into pieces, resulting in natural gas. Sealants are commonly employed to fill in these gaps, but they are susceptible to moisture or water permeation.

 

Therefore, the extra focus should be given to areas such as:

 

  • The place where your shower’s floor and wall meet.
  • Protrusions that look like vents are a part of your roof
  • Ceilings that have areas where pipes come in from.

 

Design for Fall and Proper Drainage are Vital

 

Furthermore, no matter how durable your waterproofing materials are, they are not able to stand up to the pressure of water. This is why the design of fall is essential for the success of your system of waterproofing.

 

Fall design is a term used to describe pathways that are designed to direct water away from the surface and toward drainage points. A well-designed fall path naturally leads water along the planned way with the least amount of water flowing away from it.

 

When poor quality is evident in the fall design, the water won’t be efficiently drained away. The longer time and space surfaces are exposed to water can cause damage over time.

 

The best fall design should be an effective drainage system. Unless the water has been drained and released to the outside, your surface remains under pressure. It is crucial to protect your drain from any obstructions.

 

The drains inside your home are usually blocked by litter, hair or food waste based on the considered drain. In addition, drains that are located outside that are located on the roof are often a victim of fallen leaves or an accumulation of sediments.

 

The Right Use of Membranes for Waterproofing

 

Membranes for waterproofing are a reliable solution to stop seepage or leakage of water. At present, two popular membranes are used.

 

Sheet Based Waterproofing Membrane Systems

Waterproofing Waterproofing

The initial type of membrane is called Sheet waterproofing membrane. According to its name, they are made to meet specific requirements. They are then offered in rolls that can be easily positioned over the surface to be used.

 

To attach an adhesive sheet to the surface, and to join sheets, specialists from waterproofing companies use heat on the sheet. This helps prevent gaps from developing between the sheet and the character and between the various employed sheets.

 

If appropriately applied, the waterproofing experts can cover vast areas in a small amount of time. However, the method is not very flexible and is difficult to use on irregularly-shaped sites. In addition, it isn’t easy to cover areas in which vertical and horizontal planes overlap.

 

Liquid-Based System for Waterproofing

Waterproofing Waterproofing

On the other end of the scale are liquid-based waterproofing membranes. In forms of liquids, the membranes have the flexibility to use because they do not have a limit in size.

 

To apply liquid waterproofing, membranes contractors employ roller brushes or sprayers to coat a surface with it. The problem is to maintain an even layer of the membrane. This is why more expertise and experience are required for the use of liquid membranes, as opposed to sheet-based membranes.

 

Furthermore, membranes made of liquids take longer to apply to large areas. However, they provide for this by being able to cover joints and protrusions.

 

Achieving a durable waterproofing system

 

High-quality craft, coupled with decision-making about selecting waterproofing materials, is the secret to a lasting waterproofing system.

 

Trust Waterproofing Contractor Singapore for your waterproofing requirements.

 

Waterproofing Contractor Singapore is an established and reliable waterproofing specialist in Singapore. We have supplied our customers with top-quality craft at extremely affordable costs for many years.

 

Our highly skilled specialists and contractors will assist you in identifying, analyzing and resolving any issues with waterproofing. We make use of high-end waterproofing materials and can recommend the best waterproofing membrane for your construction.

 

Waterproofing Contractor Singapore Offers The Best Waterproofing Service in Singapore

Waterproofing Contractor Singapore employs one of the latest waterproofing techniques. You can rest assured that the membrane we employ is wind-proof, frost-proof and durable. Waterproofing Contractor Singapore uses a waterproofing membrane that’s extremely easy to install and won’t hinder your daily routine, allowing you to complete your day-to-day chores without interruption.

About author:

Leave a Reply

Get Free Quote

    Our Blog Posts by Month

    Request Consultation

    We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

      X
      Contact us!